Exam E20-335 questions and answers

ITCertKing's product is prepared for people who participate in the EMC certification E20-335 exam. ITCertKing's training materials include not only EMC certification E20-335 exam training materials which can consolidate your expertise, but also high degree of accuracy of practice questions and answers about EMC certification E20-335 exam. ITCertKing can guarantee you passe the EMC certification E20-335 exam with high score the even if you are the first time to participate in this exam.

The exam questions and answers of general EMC certification exams are produced by the IT specialist professional experience. ITCertKing just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our ITCertKing's practice questions and answers have 100% accuracy. Purchasing products of ITCertKing you can easily obtain EMC certification and so that you will have a very great improvement in IT area.

When we started offering EMC E20-335 exam questions and answers and exam simulator, we did not think that we will get such a big reputation. What we are doing now is incredible form of a guarantee. ITCertKing guarantee passing rate of 100%, you use your EMC E20-335 exam to try our EMC E20-335 training products, this is correct, we can guarantee your success.

Exam Code: E20-335
Exam Name: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
One year free update, No help, Full refund!
Total Q&A: 105 Questions and Answers
Last Update: 2014-01-14

ITCertKing to provide you with the real exam environment to help you find the real EMC E20-335 exam preparation process. If you are a beginner or want to improve your professional skills, ITCertKing EMC E20-335 will help you, let you approached you desire step by step. If you have any questions on the exam question and answers, we will help you solve it. Within a year, we will offer free update.

What do you think of using ITCertKing EMC E20-335 exam dumps? ITCertKing EMC E20-335 certification training dumps, it may be said, is the most excellent reference materials among all exam-related reference materials. Why? There are four reasons in the following. Firstly, ITCertKing exam dumps are researched by IT experts who used their experience for years and can figure out accurately the scope of the examinations. Secondly, ITCertKing exam dumps conclude all questions that can appear in the real exam. Thirdly, ITCertKing exam dumps ensures the candidate will pass their exam at the first attempt. If the candidate fails the exam, ITCertKing will give him FULL REFUND. Fourthly, ITCertKing exam dumps have two versions: PDF and SOFT version. With the two versions, the candidates can pass their exam with ease.

ITCertKing provide you with a clear and excellent choice and reduce your troubles. Do you want early success? Do you want to quickly get EMC certification E20-335 exam certificate? Hurry to add ITCertKing to your Shopping Cart. ITCertKing will give you a good guide to ensure you pass the exam. Using ITCertKing can quickly help you get the certificate you want.

E20-335 Free Demo Download: http://www.itcertking.com/E20-335_exam.html

NO.1 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC practice test   E20-335 certification   E20-335 test   E20-335

NO.2 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC   E20-335 test   E20-335 original questions

NO.3 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC practice test   E20-335 test answers   E20-335

NO.4 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC   E20-335   E20-335 practice test   E20-335 pdf   E20-335

NO.5 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC   E20-335   E20-335   E20-335 questions

NO.6 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC test questions   E20-335 exam dumps   E20-335

NO.7 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC   E20-335   E20-335 exam prep   E20-335 exam simulations   E20-335

NO.8 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC   E20-335   E20-335   E20-335 original questions   E20-335

NO.9 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC answers real questions   E20-335   E20-335

NO.10 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC   E20-335 exam prep   E20-335 braindump   E20-335 exam dumps   E20-335 study guide   E20-335 exam

NO.11 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.12 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC   E20-335   E20-335   E20-335 test answers   E20-335

NO.13 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC   E20-335   E20-335 exam dumps

NO.14 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.15 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC original questions   E20-335   E20-335   E20-335   E20-335 exam simulations

ITCertKing offer the latest 000-N37 exam material and high-quality 200-101 pdf questions & answers. Our 1Y0-250 VCE testing engine and 700-104 study guide can help you pass the real exam. High-quality LOT-410 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-335_exam.html